[Device] cisco controller setup final

Would you like to terminate autoinstall? [yes]:

System Name [Cisco_b8:71:c4] (31 characters max):
AUTO-INSTALL: process terminated -- no configuration loaded
2504
Enter Administrative User Name (24 characters max): cisco
Enter Administrative Password (3 to 24 characters): ********
Re-enter Administrative Password                 : ********

Enable Link Aggregation (LAG) [yes][NO]: no

Management Interface IP Address: 192.168.45.200
Management Interface Netmask: 255.255.255.0
Management Interface Default Router: 192.168.45.254
Management Interface VLAN Identifier (0 = untagged):
Management Interface Port Num [1 to 4]: 1
Management Interface DHCP Server IP Address: 172.16.41.1

Virtual Gateway IP Address: 1.1.1.1

Multicast IP Address: 239.0.0.1

Mobility/RF Group Name: poc

Network Name (SSID): poc

Configure DHCP Bridging Mode [yes][NO]:

Allow Static IP Addresses [YES][no]:

Configure a RADIUS Server now? [YES][no]: no
Warning! The default WLAN security policy requires a RADIUS server.
Please see documentation for more details.

Enter Country Code list (enter 'help' for a list of countries) [US]: TW

Enable 802.11b Network [YES][no]:
Enable 802.11a Network [YES][no]:
Enable 802.11g Network [YES][no]:
Enable Auto-RF [YES][no]:

Configure a NTP server now? [YES][no]:
Enter the NTP server's IP address: 211.22.103.158
Enter a polling interval between 3600 and 604800 secs: 3600

Configuration correct? If yes, system will save it and reset. [yes][NO]: yes

Configuration saved!
Resetting system with new configuration...


Configuration saved!
Resetting system with new configuration...
Restarting system.