Outdoor ap join controller

Adding the Access Point MAC Address to the Wireless LAN Controller
Filter List

The wireless LAN controller maintains an access point authorization MAC address list and responds to discovery requests from access points on that list. To add the access point MAC address (or MAC addresses) to the Wireless LAN controller filter list, follow these steps:

---

Step 1 If you are not logged onto the wireless LAN controller, log on now. The Summary page appears.

Step 2 On the menu bar, click SECURITY . The Security RADIUS Authentication Server page appears.

Step 3 Under AAA in the left frame, click MAC Filtering. The Security MAC Filtering page appears.

Step 4 Click New. The MAC Filters New page appears.

Step 5 Enter the MAC address of the access point in the MAC Address field. You can also use the config macfilter add command to add a MAC filter entry to the controller.

Step 6 Select a WLAN ID or Any WLAN from the WLAN ID pop-up menu.

Step 7 Enter a description (32 characters maximum) of the access point in the Description field.

Step 8 Choose an interface from the Interface Name pop-up menu.

Step 9 Click Apply .

Step 10 Repeat this process to add other access points to the list.

=============================================================================

這邊看到的啦