Cisco AP 從Lightweight 轉到 Autonomous 模式

搞好久= =

debug capwap con cli
conf t
boot manual
 

reload



set IP_ADDR 192.168.0.2
set NETMASK 255.255.255.0
set DEFAULT_ROUTER 192.168.0.1
tftp_init
ether_init
flash_init
tar -xtract tftp://<TFTP_svr>/<Path_to_tar> flash:
set BOOT flash:/<image_directory>/<image_name>
set MANUAL_BOOT = no
set
boot


設定好後,把網路線插進G0,設定固定IP,等BVI1抓到IP 後,
就可以用網頁打開進去設定.



 reference
http://networkengineering.stackexchange.com/questions/1550/converting-ap-from-capwap-to-autonomous-bvi1-interface-gets-reverted-back-to-d


https://supportforums.cisco.com/docs/DOC-18268#Set_up_the_TFTP_Server